EVO 5.4 PRO 1200 VW SWB

£ 1,350.00 inc vat

New Evo 5 Pro -1200 -short wheel base kit

(If using Variotech 3000 1205mm, the bed may need adjusting using the U shape bolts, moving the frame to the nearside of the van roughly 20mm)

Designed for seats around 1200mm wide suitable for Reimo variotech 3000 sliding seats. The unit is only 34 cm wide with curve tambour allowing the front drivers seat to swivel fully.

  • Side unit with cutlery draw
  • 3 x Sliding tambour door
  • Soft close draws as standard
  • Evomatic catches as standard
  • Cut with twin light recesses as standard .
  • Over bed locker for low roof and elevating roof vans
  • Front bed panel & rear bed panel ( Draws are an optional extra  )
  • The worktop is cut for the right handed SMEV 9722 – 2 burner hob and sink (DOES NOT FIT NEW 9722 ELECTRONIC IGNITION VERSION)
  • Concealed self close hinges with flush fitting doors
  • Table with folding aluminium leg and  stainless steel sliding rail system
  • All connecting blocks, hinges, grey , black or silver edging, push catches and screws
  • Designed for our  42 Litre vitrifrigo fridge
  • Fits a 13 litre water bottle
  • Knock on edging for all exposed edges, the edges are pre slot cut for you to apply
  • Designed to be easy to construct with easy mount hinges, slots for aligning the panels and pre drilled hole for the connector blocks
  • Available in a range of own light weight ply finishes
  • Worktop and Table can be a different finish.
  • Edging: Silver , black or Dark Grey
  • Works with Reimo variotech 3000 sliding seats or any fixed or sliding bed around 1200mm wide. Cambee, RIB etc….
  • Works with both low roof and elevating roof conversions
  • Bed boards front and back, doors vary dependant on selected bed type.
  • DOES NOT INCLUDE LED Light shelf + Doors ( Above sink / hob  ) 

IMG_6155 IMG_6154

LEFT or RIGHT hand drive vehicle? *

Unit Finish *

View finishes 

View Discontinued Finishes 

EVO STOCK RANGE
CPL – Continuous Pressure Laminate
HPL – High Pressure Laminate ( More wear resistant 0.8mm thick )
*Being discontinued once stock is depleted

Worktop & Table Finish *

EDGE TRIM COLOUR *

Roof Type *

Please ignore brackets ( R40 =840 B ) etc…after roof type. ONLY SELECT A FULL WIDTH LOCKER FOR A SLIM KIT (eg. 1300) OR A KIT WITH A LOW BACK (eg. 2.3 5.3)
View Over bed locker types 

Bed boards *

These are panels for the front and back of your seat / bed. Please note the Rib bed is available in 2 different frame heights 340 or 330 mm contact your supplier for this info or measure yourself. Ignore brackets ( A ) etc.. after description.
View Bed Board Types 

Door catch *

Twin Light recesses *

The choice of whether or not to include the cutouts in the side of the wardrobe

Window Surround panel

3mm thick Aluminium composite window surround panel which can be drilled and cut to accept switches and control panels

Floor Thickness??? *

Do you have rails, insulation etc.. our units are cut as standard for 15mm thick floor.
How thick is your floor??

Optional extras

Add products to compliment your furniture kit. Please note some kits come with some of the items below

Note

SKU: ( A5.4P12 ) Category: Tag:

Privacy Preference Center