EVO 2.6 PRO LWB VAN T4 / T5 / T6 (Half Wardrobe)

£ 1,450.00 inc vat

EVO 2.6 PRO KIT (Half Wardrobe) – LONG WHEEL BASE VAN T5 / T6

A slightly more challenging construction than our other designs this this kit is suitable for converters and skilled Diy er’s. Designed to work with 3/4 with seat / bed

Includes the following:

  • 3 x soft close twin wall metal draws pre edgebanded ( Draws only )
  • 1 x flap shelf below sink
  • Twin light recess in tall unit with backing matching the worktop finish.
  • EVOmatic door catches as standard , please select colour options from drop down ( Push buttons are not available on the kit )
  • Aluminium extrusions on main corners
  • 1 x Sliding tambour door ( optional Black finish available )
  • Over bed locker for low roof and elevating roof vans
  • Front bed panel with door/s and rear bed panel ( Rib bed has 2 doors on the front and one on the rear panel )
  • The worktop cut for the NEW SMEV 9722  – 2 burner hob and sink
  • Concealed self close hinges with flush fitting doors
  • Table with folding aluminium leg and  stainless steel sliding rail system
  • All connecting blocks, hinges, grey , black or silver edging, push catches and screws
  • Designed for the Vitrifrigo C51I
  • Knock on edging for all exposed edges, the edges are pre slot cut for YOU to apply
  • Designed to be easy to construct with easy  mount hinges, slots for aligning the panels and pre drilled hole for the connector blocks
  • Available in a range of own light weight ply finishes
  • Worktop and Table can be a different finish.
  • Edging: Silver , black, light grey or Dark Grey
  • Works with Scopema RIB seat 112mm wide fixed or  sliding  seat or 3/4 rock n roll bed
  • Works with both low roof and elevating roof conversions
  • Water bottles are designed to be located under the bed or below the van
  • Fits 10 bottle with swing handle or remove shelf to fit 19L

Does not include:

  • LED light shelf

IMG_6155 IMG_6154





Van Model * 

VW T5/6’s require 44″ WIDTH BEDS or narrower
VW T4’s require 42″ WIDTH BEDS or narrower
– T4/5/6 require 15mm total floor thickness – Add notes if thicker or using rails
– T4/5/6 Fits a standard van configuration – Add notes for twin sliding doors, rear Aircon unit or non standard features.
Do not use large one piece ply lining.

LEFT or RIGHT hand drive vehicle? * 

Unit Finish * 

View finishes 
CPL – Continuous Pressure Laminate
HPL – High Pressure Laminate ( More wear resistant 0.8mm thick )
SD – Suede Finish

Worktop & Table Finish * 


Door catch * 

Roof Type * 

Please ignore brackets ( R40 =840 B ) etc…after roof type. ONLY SELECT A FULL WIDTH LOCKER FOR A SLIM KIT (eg. 1300) OR A KIT WITH A LOW BACK (eg. 2.3 5.3)
View Over bed locker types 

Bed boards * 

These are panels for the front and back of your seat / bed. Please note the Rib bed is available in 2 different frame heights 340 or 330 mm contact your supplier for this info or measure yourself. Ignore brackets ( A ) etc.. after description.
View Bed Board Types 

Optional extras

Add products to compliment your furniture kit. Please note some kits come with some of the items below


Please add any additional information that you have discussed with us.

SKU: ( B2.6P ) Category: Tags: , , , , ,