£ 985.00 inc vat

IMG_6155 IMG_6154

VW T4 SWB – Type 2 DIY flat pack ( adapted )

Please note this is based upon our T5 units with the tall rear cupboard adapted, because the T4 is about 50mm narrower than the T5 , beds like the Scopema rib are a very tight fit, so we would recomend using a rock n roll bed around 42″ wide. We also have not fitted this unit ourselves in a T4 , so it may require some scribing in.

Flat pack kit for DIY construction designed for the short wheel base Vw T5 transporter panel van. Select the finishes you want and the bed / roof type you have. Please choose rock n roll bed if your bed is not listed the front bed panel will be cut to the maximum size allowing you to trim it to size. We recommend the Vitrifrigo C51I as the best fridge to use offering better performance and stylish looks. Our kits are now optimised for this fridge taking advantage of  its side blowing cooling fan. You can add additional order details on the “notes ” section whilst ordering online, if you know the dimensions of you bed kick panels please add these. Allow 2 weeks for delivery

LEFT or RIGHT hand drive vehicle? * 

Unit Finish * 

View finishes 
CPL – Continuous Pressure Laminate
HPL – High Pressure Laminate ( More wear resistant 0.8mm thick )
SD – Suede Finish

Worktop & Table Finish * 


Roof Type * 

Please ignore brackets ( R40 =840 B ) etc…after roof type. ONLY SELECT A FULL WIDTH LOCKER FOR A SLIM KIT (eg. 1300) OR A KIT WITH A LOW BACK (eg. 2.3 5.3)
View Over bed locker types 

Bed boards * 

These are panels for the front and back of your seat / bed. Please note the Rib bed is available in 2 different frame heights 340 or 330 mm contact your supplier for this info or measure yourself. Ignore brackets ( A ) etc.. after description.
View Bed Board Types 

Door catch * 

Optional extras


Please add any additional information that you have discussed with us.

SKU: ( Y2.0 ) Category: Tag: