EVO 5.3 PRO SWB VAN T4 / T5 / T6

£ 1,250.00 inc vat


A slightly more challenging construction than our other designs this this kit is suitable for converters and skilled Diy er’s. Designed to work with the Scopema Rib 112cm seat / bed ( fixed frame recommended ) or any 3/4 with seat / bed.

Please Note: When fitting a sliding RIB bed ensure the frame is set in a position to allow the unit doors to open, check before drilling.

Includes the following:

  • 2x soft close twin wall metal drawers pre edgebanded ( Drawers only )
  • 1 x flap shelf below sink
  • EVOmatic door catches as standard , please select colour options from drop down ( Push buttons are not available on the kit )
  • Aluminium extrusions on main corners
  • 3 x Sliding tambour door ( optional Black finish available )
  • Over bed locker for low roof and elevating roof vans
  • Front bed panel with door/s and rear bed panel ( Rib bed has 2 doors on the front and one on the rear panel )
  • The worktop cut for the SMEV 9722  – 2 burner hob and right handed sink
  • Concealed self close hinges with flush fitting doors
  • Table with folding aluminium leg and  stainless steel sliding rail system
  • All connecting blocks, hinges, grey , black or silver edging, push catches and screws
  • Designed for the Indel B or Webasto BL41 top loading fridge offering excellent efficiency
  • Knock on edging for all exposed edges, the edges are pre slot cut for YOU to apply
  • Designed to be easy to construct with easy  mount hinges, slots for aligning the panels and pre drilled hole for the connector blocks
  • Available in a range of own light weight ply finishes
  • Worktop and Table can be a different finish.
  • Edging: Silver , black, light grey or Dark Grey
  • Works with Scopema RIB seat 112mm wide fixed or  sliding  seat or 3/4 rock n roll bed
  • Works with both low roof and elevating roof conversion
  • Will fit a 10b water bottle behind the front curved tambour door. Water bottle not included.

Does not include the following options as standard:

  • Twin light recess ( Twin cut outs in tall unit facing forward, not an option on kits ending in .3 or .5 )
  • LED light shelf

*Water and gas can be positioned in various locations .

*Please note the lower rear door on the tall unit may be blocked if using a Rock n roll bed. Please let us know if you would like us to remove the door in the customer notes section.

IMG_6155 IMG_6154


LEFT or RIGHT hand drive vehicle? * 

Unit Finish * 

If you have selected a unique finish above please add details here

Worktop & Table Finish * 

If you have selected a unique finish above please add details here


Door catch * 

Roof Type * 

This depicts the over bed locker to be included with your furniture
View Over bed locker types 

Bed boards * 

These are panels for the front and back of your seat / bed. Please note the Rib bed is available in 2 different frame heights 340 or 330 mm contact your supplier for this info or measure yourself.
View Bed Board Types 

Window Surround panel

3mm thick Aluminium composite window surround panel which can be drilled and cut to accept switches and control panels


Add products to compliment your furniture kit. Please note some kits come with some of the items below


Please add any additional information that you have discussed with us.

SKU: ( A5.3P ) Categories: ,

Privacy Preference Center