Over Bed Locker Choices
Depending on which type of roof you have on your van will affect the type of locker you need to choose.
For the low roof factory standard van the choices are straight forward , this style of locker comes in 2 widths , 3/4 width which is the most common choice or Full width which is suitable for our furniture kits that have low back section such as the evo 1.3 ,2.3, 4.3, 5.3 or those kits which are designed for the 3 rear seats such as the 1300 furniture kits or the evo 6 kit
If your van has an elevating roof then you will need to choose a locker that fits your brand of roof, this is straight forward with most of the established roof brands such as genuine Reimo, SCA and Hilo roofs.
Most other UK roofs are based upon the Reimo roof, either being direct copies or using a similar type of roof frame and scissor hinge mechanism. Most of the time our standard Reimo roof locker will work with these roofs ( Poptops Uk, Skyline etc… ) but othertimes they won’t fit because the roof frame is a different size or it has been installed and panelled differently.
To help you choose your roof locker look at the following drawings and check the dimensions against your own roof.
BED BOARD CHOICES
There’a huge range of different types of seat/ mechanisms available in the UK most of them are variations on the rock n roll beds like Smart beds, Canons forge etc… all of these beds vary slightly in the size and how the bed panels will fit. We would recommend fitting the bed after the furniture has been installed so that you can centre the bed between the side of the van and the furniture units but also so that you have space to install the furniture without having to work around the seat/ bed. All the bed boards are generally over sized on the ends allowing you to trim and scribe them to length depending on it’s position in the van. Some of the bed panels are pre cut to length in cases where we know the exact dimensions of the bed. If you have a generic rock n roll bed you can measure its height and check it against our bed boards listed below.
To fix bed boards to your metal frame we recommend using our supplied metal “L” brackets which can be fixed to the frame with self tapping screws allowing you to screw the bed panel to the frame.
SCOPEMA RIB FRAME HEIGHT CHOICES