EVO 5.4 PRO 1200 LWB VW

£ 1,390.00 inc vat

New Evo 5.4 Pro -1200 -long wheel base kit

Designed for seats around 1200mm wide suitable for Reimo variotech 3000 sliding seats. The unit is only 34 cm wide with curve tambour allowing the front drivers seat to swivel fully.

  • Side unit with triple draw pack
  • 3 x Sliding tambour door
  • Soft close draws as standard
  • Evomatic catches as standard
  • Cut with twin light recesses as standard .
  • Over bed locker for low roof and elevating roof vans
  • The worktop is cut for the SMEV 9722 – 2 burner hob and sink
  • Concealed self close hinges with flush fitting doors
  • Table with folding aluminium leg and  stainless steel sliding rail system
  • All connecting blocks, hinges, grey , black or silver edging, push catches and screws
  • Designed for our  INDEL 36L top loading fridge or can be used as storage space.
  • Space to fit a R904 gas bottle above a 10L B water bottle on a shelf.
  • Knock on edging for all exposed edges, the edges are pre slot cut for you to apply
  • Designed to be easy to construct with easy mount hinges, slots for aligning the panels and pre drilled hole for the connector blocks
  • Available in a range of own light weight ply finishes
  • Worktop and Table can be a different finish.
  • Edging: Silver , black or Dark Grey
  • Works with Reimo variotech 3000 sliding seats or any fixed or sliding bed around 1200mm wide. Cambee, RIB etc….
  • Works with both low roof and elevating roof conversions
  • Bed boards front and back, doors vary dependant on selected bed type.
  • DOES NOT INCLUDE LED Light shelf 


IMG_6155 IMG_6154

Van Model * 

VW T5/6’s require 44″ 112cm WIDTH BEDS or narrower
VW T4’s require 42″ 122cm WIDTH BEDS or narrower
– T4/5/6 require 15mm total floor thickness – Add notes if thicker and state total floor thickness.
– T4/5/6 Fits a standard van configuration – Add notes for twin sliding doors, rear Aircon unit or non standard features.
Do not use large one piece ply lining.

LEFT or RIGHT hand drive vehicle? * 

Unit Finish * 

View finishes 
CPL – Continuous Pressure Laminate
HPL – High Pressure Laminate ( More wear resistant 0.8mm thick )
SD – Suede Finish

Worktop & Table Finish * 


Door catch * 

Roof Type * 

Please ignore brackets ( R40 =840 B ) etc…after roof type. ONLY SELECT A FULL WIDTH LOCKER FOR A SLIM KIT (eg. 1300) OR A KIT WITH A LOW BACK (eg. 2.3 5.3)
View Over bed locker types 

Bed boards * 

These are panels for the front and back of your seat / bed. Please note the Rib bed is available in 2 different frame heights 340 or 330 mm contact your supplier for this info or measure yourself. Ignore brackets ( A ) etc.. after description.
View Bed Board Types 

Twin Light Recesses

Window Surround

3mm thick Aluminium composite window surround panel which can be drilled and cut to accept switches and control panels

Optional extras

Add products to compliment your furniture kit


Please add any additional information that you have discussed with us.

SKU: ( B5.4P1200 ) Category: Tag: