Sprinter 06+/Crafter 06-17 Underbed Storage – EVO Design

GARAGE DOOR BED STEP

Sam Butement — Wed, 01 May 2024 09:44:53 +0000

Garage Door Bed Step helps with access to the bed and divides the garage area. When the step is in the down positions the large opening gives you some access to the garage area. Designed to work with our kitchens and shower unit and fixed bed platforms. Please note a 700mm x 25mm notch will need to be made in the fixed bed platform as per the images. Please note the Garage Door Step sits 16mm behind the shower and kitchen unit. Please check if your under bed units will be compatible with this as some doors may not open fully and hit this step. Made in 2 sections to be easier to remove. Secured in place with Keku clips which allow this panel to be lifted vertically to be removed. Check dimensions before purchasing. https://youtu.be/GzaNR4guMJc?si=W3HJIwXpBTRaTJxi

Under platform bed storage ( D 1.1 ) Sprinter or Crafter 2006 – 2017 MWB

jonathan collier — Thu, 14 Mar 2024 13:20:45 +0000

LARGE Gas box 15kg can be purchased here

£ 150.00 inc vatAdd to basket

Custom Size Rear Hex Drawer

James — Tue, 03 Oct 2023 13:53:05 +0000

The rear sliding drawer is intended for the back of the van.

Great for accessing items further back in the van.

Uses high strength ball bearing drawer runners and is cut from 15mm birch ply with a hardwearing, durable hex pattern laminate

CUSTOM SIZE UNDER BED STORAGE

James — Wed, 07 Jun 2023 07:17:34 +0000

Lightweight ply rear storage unit, intended to go in the back rear of the van for organised storage.

Made to measure to fit into the space you have available, with advanced options for adjustable back cupboard width and horizontal shelf height.

The adjustable horizontal shelf height is intended to allow you to fit over your wheel arch in your van.

2-3 doors that all open from 1 direction (to access from back of van) and 1 flap down wheel arch compartment door

This is a universal product, therefore is squared off at the back to allow you to scribe into the shape of your van, depending on van and location, you may also need to make a cut out for the vans door stays.

Under bed sliding drawer – 1300 x 800mm

No. 2 James EVO — Mon, 20 Mar 2023 16:06:27 +0000

Rear sliding drawer for Crafter vans, 1300x800mm Uses 1000mm long runners capable of supporting loads up to 120kg. Mounted on black powder coated steel L brackets Please note the width of 800mm in the width of the whole unit see dimension drawing. Rear Notch for push bike tyres etc. Drawer is bolted through the floor . Uses high strength ball bearing drawer runners and is cut from 15mm birch ply with a hardwearing, durable hex pattern laminate

NARROW SIDE ONLY Under platform bed storage (D4) Sprinter 2006 onwards LWB (Z)

jonathan collier — Fri, 13 Jan 2023 08:57:41 +0000

1 storage unit designed to fit under our plywood bed platform for the Sprinter 2006 onwards LONG WHEEL BASE

The slimmer unit is designed to house a water tank of around 80 L with space for a water pump and expansion vessel
Water tank is accessible via a clip of panels
1 large lockers with shelf for storage

Rear under the bed sliding drawer-small- VW Crafter ( 500mm x 1220mm)

Ihor.evo — Wed, 09 Nov 2022 11:25:40 +0000

Black Hex Sliding rear Drawer for the back of the van. Drawer width is 450mm see image, internal drawer with is 420mm to allow for 15mm ply thickness.

Under platform bed storage (D4) Sprinter 2006 onwards LWB (Z1.1)

jonathan collier — Wed, 17 Aug 2022 21:14:26 +0000

2 storage units designed to fit under our plywood bed platform for the Sprinter 2006 onwards LONG WHEEL BASE

The slimmer unit is designed to house a water tank of around 80 L with space for a water pump and expansion vessel
The deeper unit is designed to accommodate a 15kg gas bottle ( optional metal gas locker box) , 1 or 2 110ah leisure batteries, fuse board electrics and a Whale expanse water heater
Water tank and battery spaces are accessible via a clip of panels
2 large lockers with shelf for storage

Recommended water tank size is 1100 x 200 x 400 ( Supplied by GFG Plastics )

Bed dividing door + step

jonathan collier — Mon, 21 Dec 2020 20:56:19 +0000

Designed to fit between the micro shower and the v6 kitchen pod ONLY ( other showers or pods will not work due to width differences ) the upper hinged door separates the under bed area from the main living space. The lower part has a step upto the bed and is robust enough to prevent object sliding against it causing damage. Suitable for TAMBOUR DOOR version of micro shower only.

REAR BED UNIT (A) SPRINTER 2006 – present & CRAFTER 2006 – 2017 MWB

jonathan collier — Wed, 16 Oct 2019 16:18:17 +0000

Sprinter Crafter Flat pack rear bed system designed fit with our rear Space pods without trim rings or can be trimmed flush if you wish to use the trim rings.

Consists of 2 side supporting cupboards and a central removable section.
Side cupboards with gas storage space constructed in light weight ply
Central section is made from 15mm birch ply available in a lacquered natural wood finish or laminated in black, grey or white HPL
Central section can be folded up to allow bicycles or large objects to use the space or completely removed if necessary

Unit can be modified for other vans, please contact us about this. Straight bed unit needs to be used with the 335mm with tall cupboard Internal size depth is 346mm for the passenger side and 215mm for the driver side. This is useful to know if you plan on fitting a water tank. Note - This can fit the LWB but scribing to will be required to fit. Please note if installing a shower adjacent to the bed 376mm more of the wheel arch will be on show in the shower. Note- If using TRIM RINGS the top and uprights will need cutting to size.