DESIGN 6 MWB-Crafter/ MAN TGE – EVO Design

EVO V8 – LARGE VANS Side door kitchen pod (SALE 25693905)

ISAAC — Wed, 08 Jul 2026 13:44:54 +0000

EVO V8 LARGE VANS Side door kitchen pod (SALE 25693905) - Never fitted in van, customer accidentally ordered incorrect kitchen pod. Universal Kitchen Pod with Iris HPL (Satin Sky Blue) Unit Finish, Bamboo Worktop Finish, Silver Edge Trim, and Satin Chrome EVOmatic XL Catches. Please note, this kitchen pod is cut universal (unscribed) with square backs, with a solid worktop with no cutouts. You will need to scribe the unit and cut the worktops yourself to suit. EVO V8 Side door kitchen pod for large the VW Crafter, Mercedes Sprinter & Man TGE - Accepts MASSIVE THETFORD T2090 - 90 litre fridge. Available here

4 soft close draws, 1 hinged door, shelf and space behind door for bin
EVOmatic XL catches
The majority of the panels are pre edge banded
Designed for the THETFORD T2090 90 liter fridge ONLY ( Does not include the fridge. )
Suits a wide variety of hobs & sinks, recommended hob is Thetford Topline 922
Fridge accessible from inside and outside the van with hinged door that can open fully
Universal model with worktop unscribed, no side step storage, unshaped back allowing it to fit into a wide variety of vehicles
Flat pack design for you to assemble
Can be cut for right hand drive vehicles
Universal model has no notch in the worktop, back panel is not shaped to pillar or step and end panel is squared to fit a wide variety of vans

Trim Rings -Driver Side for Space pods SALE (25692380)

ROGER EVO — Thu, 25 Jun 2026 08:21:51 +0000

THESE PODS HAVE BEEN TRIMMED ALREADY AND MAY NOT MATCH YOUR POD EXACTLY.

INCLUDES 2017+ Crafter Plywood surround pre-drilled for panel clips, PASSENGER AND DRIVERS SIDE

Fibre glass frame for the a neat interior finish to you space pod. Available scribed and un scribed.

Can be used on both Crafter and Sprinter vans.

Opening size is 1054 x 485 ** check dimensions will work before purchasing ** These can not be returned if you have cut them down the best way to cut them is either with a fine metal jigsaw blade or an angle grinder with a thin metal cutting disc.

Can be purchased with a pre cut ply panel designed to accept panel clips to hold the fibre glass and ply together.

**Important check how your bed frame sits in your van and will it allow the the trim ring to fit. Our own bed ply bed platform can be modified to work by cutting the top panels and cross members down , we will be selling a version designed specifically to work with the trim rings. If you have an existing bed platform purchased from us ( Pre January 2023) please be aware this will not work without modification.

Watch the videos before purchasing., here is an excellent video made by Urban ark overland please note our trim rings are a different shape and size the but the principles are the same: HERE

Note – The Trim Rings do not fit the LWB or XLWB Sprinter, even the smaller one is approximately 30mm too wide.

INTERNAL PANELS VW CRAFTER and MAN TGE LWB +2017

jonathan collier — Thu, 23 Apr 2026 09:44:28 +0000

CUT FROM 5.5mm Panels AA2, AA3 , DD2 & DD5 are collection only as they are 2.35m long and outside the size we can send on a pallet or via parcel delivery. Some of the panels are pre drilled for use with panel clips where possible others require screw fixing (3.5 x 15mm countersunk screw recommended). PANEL CLIPS ARE NOT INCLUDED

Bench seat Truma combi – 1766 x 690 x 360(h) mm

jonathan collier — Tue, 03 Feb 2026 16:20:57 +0000

Suitible for Design 5 Bench with 3 lift up lids suitable for larger vans. Hinged door allows access for installation and maintenance All panels pre edge banded. Cushions not included recommend cushion thickness 100mm - 4". Only a horizontal grain direction is possible due to sheet size (front panel).

4 x Roof Rib cover ( requires fabric or Carpet ) – CRAFTER 2017 +

Sam Butement — Tue, 07 Oct 2025 13:51:49 +0000

4 x PUSH ON RIB COVERS Supplied without fabric or carpet, images show example of finished cover. Made from 3mm composite aluminium board in random finish that can be bent into shape along the score lines. Must be covered with fabric of carpet to finish off.

Use the supplied 15mm screws, insert them into the recessed holes and screw them into the W shaped plastic block. Gently bend the covers into shape to fit the van, then cover them with fabric, and finally install. Do not bend more than necessary.

[playlist type="video" ids="25690013"]

1 x Roof Rib Cover ( requires fabric or Carpet ) CRAFTER 2017 +

Sam Butement — Mon, 06 Oct 2025 13:29:44 +0000

A super easy way to tidy up those metal roof rib gussets in your VW Crafter or MAN TGE high-roof van!

Made from 3mm composite aluminium board, each piece is pre-scored so you can bend it perfectly to fit your van’s curves. ✨

Supplied plain (no fabric or carpet) — the photos show what it looks like once finished and wrapped. Add your own touch with your favourite fabric or carpet for that clean, custom look. 🧵🚐

#VanBuild #VanConversion #VWCrafter #MANTGE #VanLife #DIYVanBuild #CamperConversion #VanLifeUK #TinyHomeOnWheels

[playlist type="video" ids="25690013"]

Under platform bed storage – Crafter 2017 onwards ( F1.1 updated ) – MWB van DRIVERS SIDE ONLY

James — Thu, 07 Aug 2025 13:03:29 +0000

LARGE Gas box 15kg can be purchased here

£ 150.00 inc vatAdd to basket

ALL DESIGN 2 OVERHEAD LOCKERS

James — Thu, 15 May 2025 16:58:00 +0000

All High level lockers as shown in design 2. Crafter 2017 onwards medium wheel base van ONLY. All lockers feature curved aluminium corner profiles Cable Cover - has Space for control panels and switches to be mounted, hides main power cable running along the top of the door and includes a Touch sensitive dimmable LED strip Locker L - Provides storage over the dinning area. Locker M - 1190mm long overhead storage to fit at the rear of the van Locker N - Provides 3 overhead cupboards for above the kitchen and bed with an optional extra spice rack to go below the lockers sitting on the worktop Spice Rack will fit with space pod Trim rings but you will need to trim the side of trim rings Over cab locker - designed to fit perfectly in the front heading lining contours of your CRAFTER / MAN TGE 2017 ONWARDS (further info and installation video seen here

3d Printed Black handle cover to fit – Sliding Door panel – New VW Crafter 2017 onwards

Sam Butement — Tue, 15 Apr 2025 10:40:15 +0000

Designed to cover the gap between the handle and the ply when using larger ply lining of the sliding door area. Works with the New VW Crafter 2017 onwards sliding door. Black Plastic handle cover that neatly hides the gap left next to the handle. Supplied with 8 x 3.5x15mm screws. Designed to work with 5.5mm ply. Does not include the ply sheet, only the black plastic handle and screws. Ideal if you are making your own ply panels and need something to cover this gap left when the handle operates. Not included - Push fit panel clip.

Sliding Door panel – New VW Crafter 2017 onwards

luc and roland evo — Wed, 26 Mar 2025 15:50:39 +0000

5.5 mm plywood door panels cut for the New VW Crafter 2017 onwards No Window cut out. Includes recesses holes for push fit panel clips. Panels are designed to be covered with lining material, but NOT foam backed lining as this will make the panel too thick and the door panel will contact the van when opened fully. Gap for door handle to operate, the metal of the van will be visible if no cover is fitted. We offer an optional 3D Printed Black Plastic handle void cover. This is a neat way to tidy up this gap. Install the handle after wrapping the panel in fabric using 15mm screws. Not included - Push fit panel clip.