DESIGN 10 – Ford transit MK L3 H3 – EVO Design https://www.evomotiondesign.co.uk VW CAMPERVAN AND MOTORHOME FLAT PACK FURNITURE DIY & TRADE Wed, 20 May 2026 14:09:00 +0000 en-GB hourly 1 https://wordpress.org/?v=6.9.4 https://www.evomotiondesign.co.uk/wp-content/uploads/2024/09/evo-logo-32x32.png DESIGN 10 – Ford transit MK L3 H3 – EVO Design https://www.evomotiondesign.co.uk 32 32 DESIGN 10 (FORD TRANSIT FURNITURE KIT) https://www.evomotiondesign.co.uk/product/design-10-ford-transit-furniture-kit/ Tue, 13 Jan 2026 11:29:51 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25692015 This is a complete furniture kit to convert your FORD TRANSIT K8 L3H3

Transform your FORD TRANSIT MK8 L3H3 into a fully functional camper with our Complete Furniture Kit. This all-in-one package includes everything you need from us to complete your van’s interior conversion, ensuring a professional-quality finish. Designed for experienced DIYers and professional converters, the kit comes flat-packed for easy transport and can be delivered directly to your door, ready for assembly.

  Included is; Bottom Units Including Shower
  1. The V11.3 kitchen unit with a Bamboo worktop, Large stainless steel sink, table B https://www.evomotiondesign.co.uk/product/evo-v11-3-large-vans-side-door-kitchen-pod/ 
  2. Shower D with LED light, shower tray and duck board. https://www.evomotiondesign.co.uk/product/shower-toilet-cubicle-d-ford-l3-h3-mk8/
  3. Garage door bed step https://www.evomotiondesign.co.uk/product/garage-door-step/ 
  4. Under bed storage K https://www.evomotiondesign.co.uk/product/ford-transit-mk8-camper/
  5. HIGH Rear bed platform + colour matched end panel https://www.evomotiondesign.co.uk/product/rear-bed-platform-ford-transit-mk8-l3-black-heksa/
  6. Seat frame box https://www.evomotiondesign.co.uk/product/seat-frame-box/
  7. ILSE rotating table in Bamboo. https://www.evomotiondesign.co.uk/product/rotating-table-leg-twin-worktops-tops-mito-table-rail/ 
  8. Table side mounting panel in Bamboo https://www.evomotiondesign.co.uk/product/table-mounting-panel-ford-transit-l3-h3/
Top High Lockers
  1. Locker F1 With LED's. https://www.evomotiondesign.co.uk/product/locker-f1-above-sliding-door-1408mm-ford-transit-l3-h3/
  2. Locker F2 with LED's. https://www.evomotiondesign.co.uk/product/locker-f2-over-dining-area-1181mm-ford-transit-l3-h3/
  3. Locker F3 with LED's and spice rack. https://www.evomotiondesign.co.uk/product/locker-f3-over-bed-kitchen-1810mm-ford-transit-l3-h3-2/
  4. Locker F4 with LED's. https://www.evomotiondesign.co.uk/product/locker-f4-over-bed-drivers-side-ford-transit-l3-h3/
  5. Locker F5. https://www.evomotiondesign.co.uk/product/locker-f5-over-cab-locker-ford-transit-l3-h3/ 
Van panelling etc
  1. Side panel set for design 10 including trim rings and panel clips. https://www.evomotiondesign.co.uk/product/ford-transit-mk-8-l3-h3-side-panels/
  2. Space pods (no windows). https://www.evomotiondesign.co.uk/product/coming-soon-space-pod-ford-transit-l3-mk-8/
  3. Light weight insulated floor for delivery. https://www.evomotiondesign.co.uk/product/light-weight-insulated-floor-ford-transit-lwb-l3-5931-mm-mk-8-front-wheel-drive/
  4. Standard roof panels + panel clips - https://www.evomotiondesign.co.uk/product/ford-transit-mk-8-l3-h3-roof-panels/
  5. Panel clips x 125 - https://www.evomotiondesign.co.uk/product/panel-clips/
Seat Options; Option 1: Option 2:
  • Double Seat From the Front of the Van.
Shower Tray Options; Option 1: Option 2: Optional Extras:   NOT INCLUDED; You will need to source / install the following to complete your van build; (Please note this is a recommended list and there still might be more parts you will require).]]> INDEL B CR86 Cruise 85 litre fridge https://www.evomotiondesign.co.uk/product/indel-b-cruise-cr86-fridge/ 

TRUMA Combi D6E – diesel & electrical + INET X control panel + second Gen – https://www.evomotiondesign.co.uk/product/truma-combi-d6e-diesel-electrical-inet-x-control-panel-copy/ 

Thetford Topline 922 hob – https://www.evomotiondesign.co.uk/product/thetford-spinflo-topline-922-hob-twin-burner-12v-ignition/ 

Large GAS box 15KG – https://www.evomotiondesign.co.uk/product/metal-gas-box-in-black-large/ 

Double Fixed Seat Frame – https://www.evomotiondesign.co.uk/product/double-seat-frame-sprinter-crafter-ducato-boxer/

Seat Cushions For Fixed Frame – https://www.evomotiondesign.co.uk/product/seat-cushions-our-fixed-frame/

LED 12v 1.5w Spotlight 35mm Diameter – https://www.evomotiondesign.co.uk/product/led-12v-1-5w-spotlight-35mm-diameter/

]]> FORD TRANSIT MK 8 L3-H3 TRIM RINGS X2 https://www.evomotiondesign.co.uk/product/ford-transit-mk-8-l3-h3-trim-rings/ Fri, 09 Jan 2026 15:11:58 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25691929 Click here for panel clips When lining the space pods, it is important not to use more than 15mm thickness of closed cell insulation otherwise this will cause the trim ring to foul on the pod. These trim rings are designed to be used with EVO space pods. It is unlikely they will work with other pods.   Included;
  • 5.5mm FEP Ply Panel + Rear Panel
  • 15mm Plywood Trim Ring (Colour Can Vary As You Will Cover This In Fabric)

Please test fit before covering in carpet. 

]]> Click here for panel clips When lining the space pods, it is important not to use more than 15mm thickness of closed cell insulation otherwise this will cause the trim ring to foul on the pod. These trim rings are designed to be used with EVO space pods. It is unlikely they will work with other pods.   Included;
  • 5.5mm FEP Ply Panel + Rear Panel
  • 15mm Plywood Trim Ring (Colour Can Vary As You Will Cover This In Fabric)

Please test fit before covering in carpet. 

]]> FORD TRANSIT MK 8 L3-H3 SIDE PANELS https://www.evomotiondesign.co.uk/product/ford-transit-mk-8-l3-h3-side-panels/ Wed, 07 Jan 2026 10:43:37 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25691870 Click here for panel clips When lining the space pods, it is important not to use more than 15mm thickness of closed cell insulation otherwise this will cause the trim ring to foul on the pod.

Please test fit before covering in carpet. 

]]> Click here for panel clips When lining the space pods, it is important not to use more than 15mm thickness of closed cell insulation otherwise this will cause the trim ring to foul on the pod.

Please test fit before covering in carpet. 

]]> Lippert Slide Out Ladder 1000mm https://www.evomotiondesign.co.uk/product/lippert-slideout-ladder-1000mm/ Tue, 30 Sep 2025 11:00:35 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25689896 Slide out Aluminium Under-Bed Ladder


This extracting aluminium ladder is designed for strength, safety, and convenience. Crafted from lightweight yet durable aluminum, it securely folds away under the bed when not in use, keeping your space neat and uncluttered.

  • Comfortable Steps: Wide, plastic step rungs provide maximum comfort and stability when climbing.

  • Strong & Lightweight: Aluminum construction ensures a sturdy yet easy-to-handle ladder.

  • Hidden Storage: Bolts directly to the underside of the bed, folding neatly out of sight.

  • Safe & Stable: Non-slip feet maximize grip on the floor, preventing slipping and adding stability.

]]>

 

]]> Plinth Raised Floor | FORD Transit L3 H3 FWD https://www.evomotiondesign.co.uk/product/plinth-raised-floor-ford-transit-l3-h3-fwd/ Wed, 24 Sep 2025 15:41:02 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25689768 Plinth for Ford Transit MK8 FWD

Designed specifically for use with our Seat Frame Box and the Design 10 layout. This clever addition raises the seating zone by 88mm, creating a more comfortable seating height while also adding valuable storage space beneath.

  • Integrated storage compartment – maximise every inch of your van.

  • Colour-matched sides – blends seamlessly with the rest of your furniture.

  • Customisable top – supplied in exposed poplar plywood, ready to be finished with the same vinyl flooring as your van for a flawless look.

This is only for the FWD van due to the difference in floor height. The 4x4 does not require this product.]]> “

]]> Locker F2 MICROWAVE – 1171mm | FORD Transit L3 H3 https://www.evomotiondesign.co.uk/product/locker-f2-microwave-1171mm-ford-transit-l3-h3/ Fri, 08 Aug 2025 14:07:21 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25688797 Locker F2 MICROWAVE - 1171mm | FORD Transit L3 H3 This roomy over-dining-area locker is designed to fit perfectly with our curved roof panels. It houses the W920 Caravan Motorhome Flatbed Microwave 700w securely out of the way. There’s also a hidden compartment for extra storage or electronics panels. Want a bit more light? Add LED lights to brighten up the dining area. **Please note this locker is designed to work with our ceiling panels. If you have done your own ceiling, the curvature will likely be different. Also, the end of the locker is designed to butt up against our over-cab locker panel F5. If you don't have these, we do not recommend this locker.**

If you have a locker F5 that was purchased before September 2025, this microwave locker will collide with the F5 door. Please get in touch with us before purchasing if you have any concerns.

]]> “

]]> Table Mounting Panel | FORD Transit L3 H3 https://www.evomotiondesign.co.uk/product/table-mounting-panel-ford-transit-l3-h3/ Thu, 31 Jul 2025 11:48:23 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25688600 Table Mounting Panel for Ford Transit MK8

Specifically designed to seamlessly follow the contours of the Ford Transit MK8 interior, this table mounting panel offers a smart solution for fitting a table rail. It mounts effortlessly using the van's existing holes—no drilling required—ensuring a clean installation with rivets for added strength.

This panel neatly finishes the awkward junction between the wall and window frame, doubling as a window sill or armrest. It also provides a sturdy, flat surface ideal for mounting a table rail or other modular van accessories.

  • Scribed to fit the Ford Transit MK8

  • Installs using existing holes – no drilling needed - Rivet nut gun required

  • Acts as a window sill, armrest, and table rail base

  • Multiple finishes available to match your interior

 

DOES NOT WORK WITH THE DESIGN 10 SIDE PANEL SET (CHOOSE OPTION BELOW)

]]> “

]]> EU EXPORT-Space pod Pair – Ford transit L3 – Mk 8 ( Only for customers in the EU ) https://www.evomotiondesign.co.uk/product/uk-export-space-pod-pair-ford-transit-l3-mk-8-only-for-customers-in-the-eu/ Tue, 24 Jun 2025 12:41:24 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25687761 Please note you be charged taxes and duty to receive these unless you are a business with a valid EORI number ( this will be checked by customs ) Refund or returns will not be accepted. Please enquire about shipping costs.   Evo space pods , side flares, sleeping pods for the L3 ford transit mk 8 van . Sold as a pair for driver and passenger side they will add around 180mm in total to the overall bed length. Finished in white, the fibre glass parts will need a light sand before painting to match your vehicle. You will need to key both the fibre glass inner surface and the van body before bonding with a polyurethane adhesive, we recommend using Sikaflex 252 Structural Adhesive or similar. These can be fitted to the LWB L4, but no factory middle glass window can be fitted on the L4. Please check dimensions in images.  Allow 1.5 tubes per side. Best to spray finish Vinyl wrapping not recommended Use a cellulose paint if going for a matt finish, Raptor paint is popular and easy/forgiving to apply. For a Gloss finish use a standard 2 pack car paint Works with both left hand (EU)  and right hand (UK) drive vans]]> IMPORTANT: PLEASE READ BEFORE PROCEEDING WITH FITTING

Space Pod Fitting Instructions                                           

  • Check Fit Before Permanent Changes:
  • Ensure the Space Pod fits properly before gluing, painting, or sanding. Return the pod in its original box for a full refund if unsatisfied. No refunds will be given if the pod is glued, painted, or wrapped.
  • Preparation:
    • If painting, avoid low baking or heating the pod to prevent distortion.
    • When wrapping, be cautious not to overheat the GRP to prevent hard bubbles forming later.
    • Ideally, paint the pods after fitting.
  • Surface Keying:
    • Key the surface of the van with wet and dry and the Space Pod with 120 grit sandpaper.
    • Sand down any high points on the Space Pod back surface.
    • Do not use etching primer paint on the Space Pod; use only sandpaper for keying where adhesive will be in contact.
  • Adhesive Application:
    • Apply polyurethane adhesive to the van in a constant bead around the sides and top of the pod to prevent leaks.
    • Cut a “V” shape in the nozzle for a higher adhesive bead.
    • Use 1.5 tubes of Sikaflex 252 or similar adhesive per Space Pod.
  • Bonding Process:
    • Bond the pod in place; use masking tape and wedges to help hold the position.
    • Place a ratchet strap or similiar around the van body and the Space Pod to apply light pressure.
    • Use foam blocks under the straps in specific places to push the Space Pod if necessary.
  • Adhesive Cleanup:
    • Clean off any excess adhesive before it sets; tar and oil remover works well.
  • Final Touch:
    • Once bonded, apply a bead of adhesive along the front edge of the pod to finish.
    • QR Link to video use your smart phone camera         pastedGraphic.png
]]> Shower Toilet Cubicle D – Ford L3 H3 Mk8 ( collection only ) https://www.evomotiondesign.co.uk/product/shower-toilet-cubicle-d-ford-l3-h3-mk8/ Tue, 21 Jan 2025 10:45:17 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=25183692 SHOWER D- 754 deep x 810 wide - height 2088mm H3 roof Check location of sky lights before purchasing this product. Shower is designed for a specific location in our Design 10 layout based on using our 18mm Ultra light sandwich floor (check your floor to ceiling height before purchasing). Roof panel can accept an optional motion sensitive light. Interior walls are water proof HPL available in gloss white as standard. Designed to work with a portable llo or composting toilet. A version  which works for the  Thetford 403 series toilet is in development the toilet will fit but we don't yet have tray yet for this arrangement. If using our universal tray C there is space for a 65mm heat duct to travel front to back of the van. All panels will need silicone sealant at junctions (not supplied) Back interior curved wall panel is gloss white hygiene board which will need to be bonded to a curved 5.5mm ply panel (supplied) Includes:
  • Laminated poplar ply with white gloss interior, exterior colour can be different finishes from the our range
  • Back wall panel 5.5mm ply and 2.5mm gloss white PVC
  • Aluminium corner extrusions
  • Roof panel is solid with an optional PIR led light
  • Solid door or optional Tambour door
Does not include  TOILET OR SHOWER TRAY. These can be purchased separately THETFORD C400 SINK is too wide to fit above this toilet. We Recommend watching this excellent video if installing a tambour door here Due to the panel sizes we  can only offer this shower as COLLECTION ONLY.]]> Finishes can be viewed here

]]> Under platform bed storage ( K ) FORD TRANSIT MK8 L3 FWD https://www.evomotiondesign.co.uk/product/ford-transit-mk8-camper/ Thu, 19 Dec 2024 19:27:17 +0000 https://www.evomotiondesign.co.uk/?post_type=product&p=24682998