Roof Panels – EVO Design

Back door panels Ducato Relay Boxer

jonathan collier — Tue, 20 Oct 2026 09:34:27 +0000

5.5 mm plywood door panels Ducato Relay Boxer sold as a pair Panels are designed to be covered with lining material

INTERNAL PANELS VW CRAFTER and MAN TGE LWB +2017

jonathan collier — Thu, 23 Apr 2026 09:44:28 +0000

CUT FROM 5.5mm Panels AA2, AA3 , DD2 & DD5 are collection only as they are 2.35m long and outside the size we can send on a pallet or via parcel delivery. Some of the panels are pre drilled for use with panel clips where possible others require screw fixing (3.5 x 15mm countersunk screw recommended). PANEL CLIPS ARE NOT INCLUDED

Roof Panels – VWT7 Ford Transit Custom – swb van

jonathan collier — Wed, 03 Dec 2025 15:51:15 +0000

PLEASE NOTE THIS IS A TEST PRODUCT- PLEASE CALL BEFORE PURCHASE

SWB High Roof Panels for VW T7 or New Ford Transit Custom
Available with pre-drilled holes for panel clips
Can also be supplied without holes for cutting or custom fitting
Designed for vans with no bulkhead

Roof Panels – CITROEN RELAY MK3 L3H2

ROGER EVO — Fri, 07 Nov 2025 16:15:54 +0000

Citroen Relay Mk3 L3 H2 roof panels designed to work with existing holes in your van for easy installation. Suitable for wrapping in headlining fabric. PRE-DRILLED HOLE FOR PANEL CLIPS ( NOT SUPPLIED ) Purchase here Panel clips

4 x Roof Rib cover ( requires fabric or Carpet ) – CRAFTER 2017 +

Sam Butement — Tue, 07 Oct 2025 13:51:49 +0000

4 x PUSH ON RIB COVERS Supplied without fabric or carpet, images show example of finished cover. Made from 3mm composite aluminium board in random finish that can be bent into shape along the score lines. Must be covered with fabric of carpet to finish off.

Use the supplied 15mm screws, insert them into the recessed holes and screw them into the W shaped plastic block. Gently bend the covers into shape to fit the van, then cover them with fabric, and finally install. Do not bend more than necessary.

[playlist type="video" ids="25690013"]

1 x Roof Rib Cover ( requires fabric or Carpet ) CRAFTER 2017 +

Sam Butement — Mon, 06 Oct 2025 13:29:44 +0000

A super easy way to tidy up those metal roof rib gussets in your VW Crafter or MAN TGE high-roof van!

Made from 3mm composite aluminium board, each piece is pre-scored so you can bend it perfectly to fit your van’s curves. ✨

Supplied plain (no fabric or carpet) — the photos show what it looks like once finished and wrapped. Add your own touch with your favourite fabric or carpet for that clean, custom look. 🧵🚐

#VanBuild #VanConversion #VWCrafter #MANTGE #VanLife #DIYVanBuild #CamperConversion #VanLifeUK #TinyHomeOnWheels

[playlist type="video" ids="25690013"]

Longer Panel Clips 23mm.

James — Tue, 27 May 2025 14:27:29 +0000

These clips are suitable for use on the roof and side panels 23mm in length

Sliding Door panel – New VW Crafter 2017 onwards

luc and roland evo — Wed, 26 Mar 2025 15:50:39 +0000

5.5 mm plywood door panels cut for the New VW Crafter 2017 onwards No Window cut out. Includes recesses holes for push fit panel clips. Panels are designed to be covered with lining material, but NOT foam backed lining as this will make the panel too thick and the door panel will contact the van when opened fully. Gap for door handle to operate, the metal of the van will be visible if no cover is fitted. We offer an optional 3D Printed Black Plastic handle void cover. This is a neat way to tidy up this gap. Install the handle after wrapping the panel in fabric using 15mm screws. Not included - Push fit panel clip.

Rear door panels – VW Crafter 2017 onwards

jonathan collier — Wed, 26 Mar 2025 12:43:54 +0000

5.5 mm plywood Panel cut for the New VW Crafter 2017 onwards

Sprinter 2006 + MWB HIGH ROOF PANELS ( Bamboo with grooves supplied 6 Black Marker Pens + 45 Black Screws )

Sam Butement — Mon, 09 Sep 2024 13:07:57 +0000

ONLY Suitable for skilled converts or skilled and competent DIYers. ( Two people required for installation ) Sprinter 2006 MWB + Designed to be glued together using PVA glue using a large hard flat surface ( 8 x 4 sheet of plywood ). Then installed in one piece. Steps to assemble.

Glue the panels together using PVA adhesive and apply weight over night on a clean hard flat surface ( 8 x 4 sheet of plywood on the floor. ) Ensure the parts are together with no gaps. Use masking tape to hold the panels together on the birch side until the glue sets. Make sure the jointing strips are not going to interfere with the metal ribs of the van.
Using the supplied black marker pens slowly drag the marker pens in one direction in the pre cut grooves. Scrubbing the pen back and forth results in the disintegration of the pen tip which makes a mess, it is better to dwell on an area that needs filling and drag the pens in one direction slowly. Take care not to rush this part and allow the ink to flow from the pens and move slowly. Once the pen dries up, swap pens and store them with the tips down, lids on to allow the ink to move towards the tip. This is a slow process and it will take about an hour to use the supplied black marker pens to get a good finish.
Apply a quick drying water based varnish with a mini foam roller on both sides, apply several coats to the bamboo side and very lightly sand between coats.
Install the roof in one large piece, two people will be needed for this process to ensure the roof is not damaged. Use two plaster board props or timber cut to length to hold the roof in place.
Carefully locate the roof centrally in the van. When the roof is held up with props it is easy to move the roof.
Once the position is good drive in the supplied black screws directly into the metal ribs using firm pressure, do not over tighten.

Two people will be required to install this and use plaster board props or timber cut to your ceiling height to hold this in place temporally while until screws are installed. Supplied with Black 3.5 x 15mm screws and 8 black marker pens. Designed to be screwed directly in to the metal roof ribs. Firm pressure needed to start off the screws, be careful not to over tighten and strip the threads. This will need varnishing on both sides of the board. This is a natural product and needs to be stored in a dry, warm location until it can be varnished. These roof panels are not cut to go around the factory fitted pillar covers.